Delta Plus 52
on November 22nd, 2011 in by admin | Comments Off on Delta Plus 52Highly professional laminator for commercial lamination in B2 size.
Robust and reliable solution reaching production speed up to 50 m/min.
Automatic sheet feeding via single-action feeding head from a pile trolley
Big diameter laminating cylinder heated by 3-zones electrical resistance heating system
Rotating knives, built-in perforator and jogging table in basic configuration
Application: high-volume jobs
Suitable for non-stop run
Basic configuration
- Automatic feeder with pile trolley
- Single action feeding head
- Automatic sheet overlap control
- Laminating cylinder heated by 3-zones electrical resistance heating
- Polyurethan pressure roll
- Airshaft
- Automatic sheet separation using rotating knives and built-in perforator
- Snapping unit pneumatically controlled
- Jogging table
Options
- Film slitter
- Additional perforator (on film reel)
- Processing sheets up to 600 g/m2
- Antistatic bar
- Automatic stacker (stacking onto pallet)
- External embossing equipment
- External stacking frame + pile trolley
- Film loading equipment
- Preventive Maintenance Spare parts Kit
Technical description
Feeding section
- Automatic sheet feeding using Komfi-design feeding head for accurate single sheet feeding.
- System of guiding plates strengthens thin paper before lamination -> helps against wrinkling.
- Sheet misfeed sensor -> protects against film sticking to the pressure roll.
Laminating section
- Smooth film unwinding using airshaft and pneumatic brake; a distribution roll prevents folds on the film.
- The laminating cylinder is fast dry-heated (electrical resistance heating).
- Advanced temperature regulation -> precise temperature control, no film overheating.
- The sheet overlap is adjustable electronically even during the machine run -> easy to operate and precise solution.
- Key operation parameters are entered via a touch screen -> fast and comfortable.
- Thrust of pressure roll is pneumatically adjustable on both sides -> strong and precise pressure system.
Snapping and stacking section
- Adjustable decurling bar for straightening sheets after lamination -> to reach flat output.
- Separation of sheets done by snapping roll with help of rotating knives and a skewing wheel -> reliable sheet separation with clean edge at high processing speed.
Technical parameters
| Parameter | Value |
|---|---|
| Max. speed of lamination: | 50 m/min |
| Min. sheet dimensions: | 20 x 20 cm |
| Max. sheet dimensions: | 52 x 74 cm |
| Paper weight: | 115-350 g/m2; option up to 600 g/m2 |
| Max. paper pile: | 73 cm |
| Thickness of laminating film: | 24-50 μm |
| Kind of laminating film: | OPP, PET, Nylon |
| Time of laminating roll warm up (25÷100 °C): | 3 min |
| Sheet overlap accuracy (at constant laminating speed): | ±2 mm |
| Machine dimensions incl. table / stacker (l x w x h): | 290 × 126 × 144 cm / 367 x 126 x 144 cm |
| Air supply: | Min. 6 bar |
| Consumption of compressed air: | |
| Max. pressing force: | 26.6 kN |
| Max. linear nip pressure: | 51 N/mm |
| Power supply: | 11.2 kVA; 3 x NPE 400 V AC, 50 Hz |
Note.: Parameters for basic configuration only!
The above mentioned parameters are valid only for the latest model. The technical parameters can change.
Custom-built solution
- Possibility of individual machine modification based on specific requirements.
Photogallery
 |
 |
 |
| Delta Plus 52 | Feeding head | Airshaft |
 |
 |
|
| Rotating knives | Sheet stacker |
Comments are closed.